Are exercises with or without occlusal splints more effective in the reduction of pain in patients with temporomandibular disorders of myogenic origin? A systematic review

Abstract Temporomandibular disorders (TMD) is a term used to describe a set of clinical conditions that may compromise the temporomandibular joint (TMJ) and masticatory muscles and/or associated structures, considered the most frequent cause of orofacial pain of non-dental origin. In recent years, many forms of physical therapy have been used in the treatment of TMD to reduce pain and improve the range of mandibular movement present in this impairment. Among these resources are kinesiotherapy (exercise), electrothermal and manual therapy, acupuncture, training posture, mobilizations, and biofeedback. Objectives To determine if exercises with or without occlusal splints are effective in reducing pain in patients with temporomandibular disorders (TMD) of myogenic origin. Methodology This systematic review was registered in the International Prospective Register of Systematic Reviews (CRD 42019134244). Controlled trials published in PubMed, Scopus, and Cochrane Library following PRISMA guidelines up to April 2022 were randomized and included. The population above 18 years, which evaluated the effectiveness of exercise with or without occlusal splints in reducing pain in patients with TMD of myogenic origin, diagnosed through the Research Diagnostic Criteria for Temporomandibular Disorders, was also included. There was no restriction on the period of publication. Cochrane risk of bias analysis was performed. Results Of the five included articles, all showed a reduction of pain, but without significant differences between the interventions performed. Additionally, studies that evaluated the quality of life and mandibular movements showed a reduction in pain, but no significant differences between therapies. Conclusion The analyzed studies showed no difference in the improvement of pain, quality of life, and mandibular movements between the groups that performed only exercises or the associated treatments.

Vertical and horizontal misfit analysis of 3-unit fdp fabricated with different techniques and cad/cam systems

Abstract The aim of this is was evaluate the vertical and horizontal marginal adaptation of 3-unit fixed partial denture frameworks fabricated using different techniques and CAD/CAM systems. A total of 40 framework specimens were fabricated and divided into four groups as follows: lost-wax casting (G1); lost-wax casting with welding (G2); extraoral optical scanning of models (3S/DWOS) (G3); intraoral optical scanning (Cerec Bluecam/Sirona) (G4). A reference model was used to simulate a fixed partial denture with three elements (with a central pontic). The frameworks of G1 and G2 were cast in nickel-chromium (NiCr) alloy, whereas those of G3 and G4 were milled in zirconia. In all groups, vertical and horizontal marginal adaptation (over-contour and under-contour) was evaluated using a three-dimensional optical microscope (Quick Scope, Mitutoyo). The results showed higher vertical marginal misfit in G1 than in the other groups (p<0.001). Regarding horizontal marginal misfit, higher over-contour values occurred in G3 than in the other groups (p<0.001). G3 did not show under-contour at all, whereas the other groups did not differ from each other in this regard (p>0.05). Within the limitations of this study, it can be concluded that lost-wax casting with welding is a viable alternative to the use of CAD/CAM systems to fabricate frameworks of three-unit FPDs, since the techniques yielded similar vertical misfit values. Extra-oral CAD/CAM systems showed the highest horizontal misfit (over-contour) compared to other groups.

Resumo O objetivo deste estudo foi avaliar a adaptação marginal vertical e horizontal de infraestruturas de prótese fixas de três elementos confeccionadas por diferentes técnicas e diferentes sistemas CAD/CAM. Um total de 40 infraestruturas foram confeccionadas e divididas em quatro grupos: fundição por cera perdida (G1); fundição por cera perdida com ponto de solda (G2); escaneamento óptico extraoral para escaneamento do modelo (3S/DWOS); escaneamento óptico intraoral (Cerec Bluecam/Sirona) (G4). Uma matriz metálica foi utilizada para simular uma prótese fixa de três elementos (com pôntico central). As infraestruturas do G1 e G2 foram fundidas em liga metálica de níquel-cromo (NiCr), enquanto que as infraestruturas de G3 e G4 foram fresadas em zircônia. Todos os grupos foram analisados quanto à adaptação marginal vertical e horizontal (sobrecontorno e subcontorno) em microscópio óptico tridimensional (Quick Scope, Mitutoyo). Os resultados apresentaram maiores valores de desadaptação marginal vertical no G1 comparados aos outros grupos (p<0,001). Em relação a desadaptação marginal horizontal, maiores valores de sobrecontorno foram observado no G3 em comparação com os demais grupos (p<0,001). Não foi observado valores de subcontorno para o G3, enquanto que os demais grupos não apresentaram diferença significante para o subcontorno (p> 0,05). Dentro das limitações do presente estudo, pode-se concluir que a técnica convencional após ponto de solda é uma alternativa viável para confecção de infraestruturas de próteses fixas de três elementos comparado ao uso de sistemas CAD/CAM, uma vez que as técnicas apresentaram valores de adaptação marginal vertical similares. Os sistemas CAD/CAM extraoral apresentou o maior desajuste horizontal (sobrecontorno) em comparação com outros grupos.

Three-Dimensional Finite Element Analysis of Varying Diameter and Connection Type in Implants with High Crown-Implant Ratio

Abstract The aim of this study was to evaluate the effect of varying the diameter, connection type and loading on stress distribution in the cortical bone for implants with a high crown-implant ratio. Six 3D models were simulated with the InVesalius, Rhinoceros 3D 4.0 and SolidWorks 2011 software programs. Models were composed of bone from the posterior mandibular region; they included an implant of 8.5 mm length, diameter Ø 3.75 mm or Ø 5.00 mm and connection types such as external hexagon (EH), internal hexagon (IH) and Morse taper (MT). Models were processed using the Femap 11.2 and NeiNastran 11.0 programs and by using an axial force of 200 N and oblique force of 100 N. Results were recorded in terms of the maximum principal stress. Oblique loading showed high stress in the cortical bone compared to that shown by axial loading. The results showed that implants with a wide diameter showed more favorable stress distribution in the cortical bone region than regular diameter, regardless of the connection type. Morse taper implants showed better stress distribution compared to other connection types, especially in the oblique loading. Thus, oblique loading showed higher stress concentration in cortical bone tissue when compared with axial loading. Wide diameter implant was favorable for improved stress distribution in the cortical bone region, while Morse taper implants showed lower stress concentration than other connections.

Resumo O objetivo deste estudo foi avaliar o efeito da variação do diâmetro e dos tipos de conexão na distribuição do estresse no osso cortical para implantes com a proporção coroa-implante. Seis modelos 3D foram simulados com os programas InVesalius, Rhinoceros 3D 4.0 e SolidWorks 2011. Os modelos foram compostos de osso da região mandibular posterior. Foram incluídos implantes de 8,5 mm de comprimento, diâmetro Ø 3,75 mm ou Ø 5,00 mm, e tipos de conexão como hexágono externo (EH), hexágono interno (IH) e cone Morse (MT). Os modelos foram processados usando os programas Femap 11.2 e NeiNastran 11.0 e usando uma força axial de 200 N e força oblíqua de 100 N. Os resultados foram registrados em termos da tensão principal máxima. O carregamento oblíquo mostrou alta tensão no osso cortical em comparação com a carga axial. Os resultados mostraram que os implantes com maior diâmetro apresentaram distribuição de tensões mais favorável, independentemente do tipo de conexão, enquanto que os implantes cone Morse apresentaram melhores distribuição de tensões comparado aos outros tipos de conexão, especialmente no carregamento oblíquo. Assim, os implantes de maior diâmetro foram mais favoráveis para distribuição das tensões na região de tecido ósseo cortical, enquanto que os implantes cone Morse apresentam menores concentrações de tensões do que as outras conexões.

Short implants versus longer implants with maxillary sinus lift. A systematic review and meta-analysis

Abstract This study compared the survival rate of dental implants, amount of marginal bone loss, and rates of complications (biological and prosthetic) between short implants and long implants placed after maxillary sinus augmentation. This systematic review has been registered at PROSPERO under the number (CRD42017073929). Two reviewers searched the PubMed/MEDLINE, Embase, LILACS, and Cochrane Library databases. Eligibility criteria included randomized controlled trials, comparisons between short implants and long implants placed after maxillary sinus augmentation in the same study, and follow-up for >6 months. The Cochrane Collaboration's tool for assessing the risk of bias in randomized trials was used to assess the quality and risk of bias of the included studies. The search identified 1366 references. After applying the inclusion criteria, 11 trials including 420 patients who received 911 dental implants were considered eligible. No significant difference was observed in the survival rate [p = 0.86; risk ratio (RR): 1.08; 95% confidence interval (CI): 0.46-2.52] or in the amount of marginal bone loss (p = 0.08; RR: −0.05; 95%CI: −0.10 to 0.01). However, higher rates of biological complications for long implants associated with maxillary sinus augmentation were observed (p < 0.00001; RR: 0.21; 95%CI: 0.10-0.41), whereas a higher prosthetic complication rate for short implants was noted (p = 0.010; RR: 3.15; 95%CI: 1.32-7.51). Short implant placement is an effective alternative because of fewer biological complications and similar survival and marginal bone loss than long implant placement with maxillary sinus augmentation. However, the risk of mechanical complications associated with the prostheses fitted on short implants should be considered.

Impacto de uma experiência extensionista na formação universitária / Impact of an extension experience in university education

Este estudo teve como objetivo analisar o impacto do projeto de extensão universitária, Resgatando Sorrisos, na formação de estudantes do curso de Odontologia da FOP - UPE, nos anos de 2013 e 2014. Foram utilizados 02 questionários em momentos distintos, tendo como amostra 71 alunos. Foi utilizado o teste de hipótese estatística Wilcoxon para comparar as respostas de antes e depois da ação. Diante da elevada frequência de respostas, como "muitíssimo" e "bastante", observamos um alto grau de aceitação e entendimento da importância do projeto na formação do aluno, assim como no que se refere à capacidade de mudança que o projeto pode causar na vida dos pacientes e sua possível aplicabilidade no sistema público de saúde, dentre outras questões. Contudo, observa-se no ano de 2014 em quesito referente ao grau de expectativa inicial e satisfação final do projeto, uma diferença estatística entre a ida e a volta, p=o,o1. Conclui-se que os alunos apresentam um entendimento positivo em relação à ação extensionista, considerando-a importante para sua formação profissional e pessoal... (AU)

The aim of this study was to analyze the impact of the University Extension Project, ResgatandoSorrisos, in the graduation process of students of Dentistry course FOP - UPE in the years of 2013 and 2014. There were 02 questionnaires used, at different times, with a sample size 71 students. Wilcoxon statistical hypothesis test was used to compare responses before and after the action. Such high frequency responses of "vital" and "enough", a high degree of acceptance and understanding of the importance of the project in the formation of the student was observed, as well as the capacity of a change that the project may cause in the lives of patients and its possible applicability in the public health system, among other issues. However, in 2014, there was a statistical difference between the outward and return (p = o, o1) in a question referring to initial degree of expectation and ultimate satisfaction of the project. It was concluded that students have a positive understanding about the extension action, and they consider it important for their professional and personal training... (AU)